Home Page

You've been looking long enough. Without a college degree or even a high school diploma, you can earn a respectful income and have a career you can be proud of. You can easily do it over the Internet. It works for anyone who is willing to follow the simple instructions. There are many people earning hundreds, even thousands of dollars every day with this proven plan, and there is no reason why you can't be one of them. You do not have to do any personal recruiting or selling, just follow a simple, proven Internet marketing procedure that works.

What business are we talking about? If you have the perfect Internet marketing system, which of the thousands of businesses available should you promote? Look at the following facts and you will know without a doubt which business to take onto the Internet with this proven system.

Ø The United States alone has a population of about 284,000,000 people. If the average family is about 2, that means there are about 142,000,000 households in America that could have some type of Home Based Business. In 1998 there were about 35,000,000 Home Based Businesses in America. It is estimated that this figure will rise to about 95,000,000 by the year 2005.

Ø Many tax authorities in America and other countries state that, "the Home Based Business is the only legitimate tax loop hole that hasn't been plugged, and they estimate that by the year 2010 nearly every household in America and most free countries will have some type of Home Based Business". Click here for a link to information on the tax advantages of owning a "Home Based Business"

Ø Of all the Home Based Businesses, Multiple Level Marketing (MLM) is by far the fastest growing segment (probably because of the promise of the residual income). But something was missing (only about 5 % were successful) and we're going to show you the solution. If you are going to go to the trouble and expense to sell something over the Internet, why not sell a product or service that has a "repeat factor" built into it. Nearly all Network Marketing Companies (MLM) require that each representative periodically purchase (either for personal use or resale) a certain amount of their company's products. Network Marketing is over a $100 Billion a year industry.

Ø In the past 50 years, over 16,000 Network Marketing companies have been started. 90% of them didn't survive to see the end of their 2nd year. 95% of them didn't make it to their 5th year. Only 29 Network Marketing companies, out of 16,000 who started in the last 50 years, lasted longer than 10 years and all of them are still in business today. Yes, new start-up companies can succeed, but why not stack the odds in your favor by going with one of the 29 companies who are already successful.

The statement that you have to be on the ground floor to get the "best position" in a MLM company, couldn't be farther from the truth. The only "good position" is the one you're at right now. The promise of help from the people who invited you to join the company (sponsored you) usually doesn't happen or if it does, it's not enough. This MLM series will teach you to be the one who helps the others.

Let's assume you agree that MLM is the best type of company to promote on the Internet. The next obvious question is which MLM Company should you promote? Look at the facts: of all the MLM companies, the fastest growing are those with a nutritional product line. It costs less to take preventative health measures than fix a problem after it exists. Plus, in dollars and cents, nutritional products are consumed and need to be replaced, and that means additional sales or residual income. According to Paul Z. Pilger, a world-renowned economist and author, "the wellness industry will exceed the one trillion dollar health care industry in the next 10 years".

Can it be done on the Internet? Yes, and the process is so simple, you'll kick yourself for not seeing it!

Here's the problem. Regardless of the company you represent or the products or services they sell, (even a nutritional company), or whether you sell over the Internet or in a traditional way; 95% of the people in the world today are not sales people! They weren't before you talked to them and they won't be after you talk to them. No matter how much training and motivation you give them, they will still fail in sales. Recruiting is selling and if you ask them to recruit, they are going to fail. All sales companies, insurance sales, real estate sales, automobile sales and MLM sales, experience nearly the same success/failure ratio.

If you didn't have to recruit new people or close any sales, selling could be very easy, in fact, it would be fun; but how would sales be made? Can you imagine how easy it would be to enroll new representatives if no one had to do any recruiting, closing or selling? That's what we're going to show you in this website. This works for everyone. Turn your 95% failures into successes!

Let's go one step farther and completely eliminate personal contact with prospective representatives. Let your computer do all the selling for you over the Internet. All you have to do is copy a few pages and paste them where we show you and you'll have your own silent salesman working for you 24 hours a day, 7 days a week.

Does somebody still have to buy the product? Yes! Each MLM representative still has to meet the "product purchase" and "use" requirements or their own company, but your computer will do the rest of the work.

Ø If you would like a more detailed definition of MLM as described by the legal court systems in America, visit the website of Gerald P. Nehra, one of America's foremost authorities on the subject. His website can be seen at: Click here for a link to his site.

The secrets in this MLM series will teach you how to find interested prospects on the Internet and get them to your company's website where they will either sign up or purchase your products. All you will need to do is set up two (2) autoresponders. You've already received a copy of the email message in autoresponder # 1 (that's the email titled "It's Your turn").

The two essentials. There are only two subjects essential for you to understand to be successful with this MLM series and we will teach you everything you need to know about both of them.

Whether you've been in one or several MLM companies now or in the past, or if you're just looking for the first time, the following step-by-step instructions will ensure your success in the #1 home based business on the Internet. MLM does work if you work it right! All you need is access to a computer and the Internet. If you don't already possess the basic "copy and paste" skills needed in this program, we'll teach them to you.

Follow these steps in the exact order they are presented to set up your own MLM series.

We have gone into great detail with the following steps so that even a novice to a computer and the Internet can complete this MLM series and become very successful. If you are already comfortable with your computer and the Internet, you will be able to skip many of the step-by-step instructions that follow. Let's get started.

If, after reading this entire MLM email series, you would like to join our Company, but feel that you do not have the time to complete each of the following steps outlined in it, we will set up the entire series for you for a one time fee of $49.95 (advertising expenses not included). We would prefer you follow the instructions and set this series up yourself. However, we do want you to be successful, and therefore, if you want us to set it up for you. Click here for further instructions.

1. Save into your word processor the original email you received when you began this MLM series. The first line of this email says: "FREE: RETIREMENT INCOME POSSIBLE IN ONE MONTH. NOT A GET RICH QUICK PROGRAM OR A CHAIN LETTER!" There is a copy of this email and two other shorter emails in the "Advertisements " section of this website.

Save a copy of the entire "Advertis ements" section offline in your "word processor" in a new folder called "PPA". Save these advertisements in a file titled "Advertisements" and store them in your "PPA" folder.

2. Save into your word processor a copy of the second email you received in this MLM series. The first line of this second email says: "This email contains the free

information you requested". Save this email in a file titled "auto 1" and store it in your "PPA" folder.

3. Set up a new email address, somewhere other than where your main email address is,

such as Yahoo, Hotmail, Amazon, Juneau, . . etc. Try to select a user name that is short and does not end with the lower case letter "l" or the number "1" as these characters are easily confused with each other. Here's an example: xxx@hotmail.com. (Note that xxx does not end with the lower case letter "l" or the number "1"). Be sure to record your new email address and password somewhere it is safe and you can access it quickly.

4. Click here to go to the http://www.freeautobot.com link on the Internet and click the icon on the left side titled "Join Now - Free". Complete the "Sign up" instructions. For simplicity, try to select the same user name (if it's available) (that's the portion of your address on the left side of the "@" sign) and the same password that you used in setting up your new email address in step # 3. In the autoresponder add the number "1" after the user name. (Here's an example: if your email address is xxx@hotmail.com, try to make your autoresponder address xxx1@freeautobot.com.)

If the user name you select in the autoresponder (example: xxx) is not available, that's ok, use whatever addresses you want (it's just easier to remember if the names are similar). Whatever user name you use, be sure to ad the number "1" after it (we'll explain why later). Again for simplicity, use the same password for both of your autoresponders that you used with your new email address. Once you have acquired a user name for the first autoresponder, it is very easy to ad an additional character to it for the second autoresponder.

Once you have selected a new autoresponder address and password, click on the "Login" icon with your new user name and password (you are just checking to make sure you opened this autoresponder correctly).

To set up your second autoresponder, click your "back arrow" two times or go back to the freeautobot "sign up" screen and repeat step 2 again. It should be completely filled in except your password (if not, complete the entire page again).

When completing the "sign up" the second time, delete the number "1" and add the number "2" after your user name (example: xxx2), enter the same password and again click on the "signup" icon at the bottom of the page and "Login" (you are just checking to see if you completed the sign up correctly).

Congratulations, you have just set up your two autoresponders. We'll add the messages to each of them a little later. Each autoresponder should have a different number following your user name. You should have 2 separate autoresponders titled as follows: xxx1@freeautobot.com and xxx2@freeautobot.com (use your own user name in place of the "xxx's").

Be sure to record your new autoresponder addresses and passwords somewhere they are safe and you can access them quickly.

5. We're going "off line" at this time, so either click "minimize" in the upper right hand corner of your monitor or actually exit the internet (we'll be back soon).

6. Go to your "word processor" and open the folder you named "PPA". You should have already created your PPA folder in your word processor and saved the first email we sent you (the one titled "Advertisements"), the second email (the one titled "auto 1") and the third email (titled "auto 2"). If you haven't saved these emails into your "PPA" folder, go back to step # 1 and do so now.

Ø The email titled "auto 2" is only available when you follow the instructions to visit our Company's website.

7. Open the file titled "Advertisements" in your "PPA" folder and we'll edit the "hyperlink" that is already on the page. You will notice that near the bottom of the first email you received from us there is a hyperlink (the words are colored) that says "Click here (mailto:xxx1@freeautobot.com) and press send to receive free information on how to have your retirement under your control in the next 30 days. The hyperlink address has to be changed to that of your new xxx1autoresponder, the one you titled xxx1@freeautobot.com (be sure to use your "user name" not the xxx's).

8. No changes are necessary to the file titled "auto 1" as that hyperlink sends the responder to this website. However, you do have to make hyperlink changes to the file titled "auto 2".

Open the file titled "auto 2" in your "PPA" folder and we'll edit the "hyperlink" that is already on the page (the first line in this email says, "It's time to look at our Company!"). To get a copy of "auto 2", visit our company's website. You will notice that near the bottom of "auto 2" there are two hyperlinks (the words are colored). You need to edit the one that says "Right now, go to http://www.(your company name).com/xxxxxx; then click on your country". The address has to be changed to show your company ID #. Your company ID # is the series of numbers at the end of the address (example: xxxxxx) (be sure to use your company ID #, not the xxx's).

9. Copy the file page titled "auto 2" to your clipboard and reopen the internet site "freeautobot.com". (When you go from an "offline" site to an "online" site, you will not loose anything on your clipboard.)

10. When you are at the "freeautobot.com" website we left in step # 5. Log in again with your new user name xxx2@freeautobot.com. At the next screen, left click on "message control" near the top. At the "message control" screen left click on the word "Edit" in the white area (not the blue "Edit"). This will take you to the "Edit Message" screen. (Note that the small box "add new message after message" just below the word "Edit" should be "0". This indicates that your message will be sent out immediately upon arrival and you don't need to make any changes here).

At the "Edit Message" screen, delete the phrase "Instant auto response" in the white message box. Replace it with a copy of the email that we sent you titled "auto 2" (this is on your clipboard). This is easily accomplished by placing the cursor in the upper left-hand corner of the message box and right-click the mouse once. This will bring up the "copy and paste" menu again. Left-click the mouse once on the "paste" option and the entire "auto 1" message will appear in the message box.

The highlighted hyperlinks will not appear highlighted in the autoresponder text box. It is there and will appear in the message that is sent out. Therefore, make sure the hyperlink is correct before you copy and paste to your autoresponder.

You will notice that the subject line "It's your turn!" is in the message box. Delete the word "Autoresponse" in the subject box (just above the message box) and type (or copy and paste) the new subject line "It's your turn!".

When you have completed the "subject line" and the "message box", left click on the "update" icon at the bottom of the page. Autoresponder # 2 is now ready. Left click on the words "Log out" at the top of the "Edit Message" screen. This will take you back to the "Login" screen.

11. Login again, using "xxx1" and it's password. Complete the entire procedure in step # 10 except use the file titled "auto 1" instead of "auto 2". Copy and paste the file titled "auto 1" into the autoresponder titled "ppa1@freeautobot.com and then log out and close freeautobot.com.

"auto 1" should be copied and pasted into the autoresponder called "xxx1", and "auto 2" should be copied and pasted into the autoresponder called "xxx2" (be sure to use your autoresponder address, not the xxx's).

We recommend that you print a copy of the previous eleven (11) steps and the following

"final Checks" "A" through "G". You will need them as you procede

It may seem like a lot of work to go through to set up these autoresponders and hyperlinks, but once they are in place your retirement program will be very simple. First, there are a few short procedures that you should do to make sure everything is set up correctly.

A. Recheck each autoresponder to be sure that your prospect is being sent to the next autoresponder. For example: when your prospect reads the first email advertisement the hyperlink at the bottom must send them to "auto 1". When your prospect reads "auto 1", the hyperlink at the bottom must send them to http://www.ppanow.com (this website).

The blank email in "Visit our Company", must be addressed to "xxx2@freeautobot.com (be sure to change the user name "xxx2" to your user name). Be sure the "xxx2" email sends your prospect to your company website (with your company ID # included in the address, not our xxx).

After your prospect reads your home office website and is ready to come back to this website for the final instructions, be sure our address is correct (http:www.ppanow.com).

B. While you are checking the hyperlinks in step # 1 above, also check to see that the text in your autoresponders hyperlinks includes your addresses in them, not the addresses of the person who sent you this MLM series.

If you have to make any changes in any of the autoresponders, then you should make the same changes in the corresponding "auto" file in your "PPA" folder.

C. When all the autoresponders are correct, you should do a "TEST" run on your MLM series program. Here's how you do the test:

(a) Go "online" to your main email box (not the new one you set up for this MLM series.) and open the "compose" section.

(b) Send a copy of the first email in your "Advertisements" file to your new email address (example: ppa@hotmail.com).

(c) When you receive the email with the title "FREE: RETIREMENT INCOME POSSIBLE IN ONE MONTH. NOT A GET RICH QUICK PROGRAM OR A CHAIN LETTER!", follow the hyperlinks on each page to be sure they work the way they are supposed to.

Ø Note that some email servers do not accept hyperlinks (most do) in their incoming messages. The words in the hyperlinks are all there, but they are not "highlighted" and ready for easy linking. That is why each of the hyperlinks in this MLM series include the actual address. When someone receives an email without the hyperlink being highlighted, they simply need to copy the autoresponder address manually to the "To" line in their email "compose" box and then press send. The end result is the same.

D. If you recall, at the bottom of each of the email messages you send out, there is a short sentence that says " * To stop receiving these emails, click "Reply", type "remove" in the subject line and send". When anyone chooses to have their name removed from your emailings, this "remove" request is sent to your "new" email address, the one you opened in step 3.

You need to check this "new" email box periodically looking for the word "remove" in the subject line of your "in" box (new mail). Their email address will be in the "from" line on their request to be removed and you can copy it either manually or by "copy and paste" to a file somewhere.

E. Go to your autoresponder titled "ppa1@freeautobot.com" (go to your own autoresponder address). Open it and login. At the top of the "Successfully Logged In" screen, click on the words "Search Leads". This will take you to the "Search Leads" screen. Left click on the blue word "Search" at the bottom of this screen and you will be taken to a screen that has all of the prospects who have responded to your emails.

Find the email address that matches the one of the person who requested to be "removed" in your "new" email box. Left-click the "delete" box to the right of their email address (do this for each person who has requested to be removed). At the bottom of this screen, left click on the "Delete Checked" and just those names you have checked will be removed from further emailings.

Those people who have requested to be removed from further mailings could have accomplished the same thing simply by not requesting the next hyperlink, but some of them don't know that. Plus you are complying with "spam" laws by giving them a way to be removed. Removing their name and email address is also the courteous thing to do.

You have probably figured it out already all by your self that you now have a complete email list of anyone who has responded to your ads. Those who have not asked to be removed, but did not join your MLM company (or whatever company you are promoting), are ideal leads to whom you can send other advertisements in the future.

F. Go to the "Directory of Ezines" (if you choose not to sign up with them, go to the "www" and find an ezine company that you want to advertise with) and place one or more of your ads with them. If you will follow the directions in this MLM series, you should receive results very quickly.

G. If you joined us as a distributor with our company (we sincerely hope you did as our company does meet all the criteria for the # 1 home based business) go to the email box you gave when you completed our "Online" application. Look for a "Welcome to our company" email which has your new distributor ID # and passcode.

With your new company ID #, go to step "A" above and insert it in the hyperlink that takes your prospects to your company website.

Congratulations! You are now on your way to MLM success with our company. You now have in your possession a very sophisticated email program that will bring many new distributors to your MLM company. You are not only on your way to the high rank of Platinum, but to the highest rank in the company - "Presidential Platinum" - - - - you will become a "PPA", - - - - a "Presidential Platinum Achiever".

If you did not join our company we thank you for looking and wish you well. This MLM series is still free and can be applied to just about any other company on the internet.

***************************************************************************************************************************************************************************************************************************************

(All of the instructions is this "help" section were written using "Windows 98".)

When you want to save something you have seen on the Internet or in an email you have received (something you may want to edit or use in the future), an easy way is to use the "copy and paste" feature of your computer. This is done by first highlighting the word (or sentence) (or paragraph) (or page) you wish to save.

Highlighting. Highlighting is accomplished by first moving the cursor (use your mouse) to the beginning of the word (or sentence) (or paragraph) (or page) you wish to highlight and then press (and hold down - do not release it yet) the left mouse button. With the left mouse button still held down, slide (drag) the cursor (with your mouse) to the end of the word (or sentence) (or paragraph) (or page) you wish to save and then release it (the left mouse button). You will see that the word (or sentence) (or paragraph) (or page) you wish to save is now a different color (it has been highlighted). If you highlighted too much or not enough of the word (or sentence) (or paragraph) (or page) simply click the left mouse one more time. This will remove the highlighted area and you can try it again.

Copy. When you have highlighted the entire word (or sentence) (or paragraph) (or page) you wish to save and have released the left mouse button, move the cursor to anywhere in the highlighted area (it will now be a white arrow) and click the right mouse button once. This will bring up the "copy and "paste" menu (and possibly a few other options). Left click your mouse once on the "copy" option and this will place a copy of the entire page in a temporary file called your "clipboard". Whatever you place on the clipboard is accessible either "on-line" or "off-line".

Press the "minimize" icon in the upper right corner of your monitor and go "off-line" or "out of your email-box". Go to your "Desk Top" and left-click on the icon titled "My Documents" or "Documents".

Ø If one of these titles do not appear on your "Desk Top", simply left-click on the word "Start" in the lower left corner of your monitor. This will bring up a menu that lists many of the general functions of your computer and one of these titles will be on that list. Left-click on "My Documents" or "Documents" and you will be taken to a screen that shows all of the various folders you have there.

Left-click on the word "File" in the upper left corner of your monitor and then left-click again on the word "New". This will take you to another screen with several options. Click on the option titled "Folder" and you will find yourself back at the "My Documents" screen. You will notice that there will now be an addition of a new yellow colored folder with the words "New Folder" highlighted in it. Also notice that the cursor is flashing at the end of the words "New Folder". Use your "backspace" key on your keyboard and backspace and remove the letters "New Folder". Now type the letters "PPA" in the space where "New Folder" was.

Congratulations, you have just set up a folder titled "PPA". At this time it is empty, but this is where you will store the "email files" we talk about throughout this MLM series.

Paste. Go to your "Desk Top" and left click on the icon called "Word", or "Word Processor", or "Microsoft Word".

Ø If one of these titles does not appear on your "Desk Top", simply left click on the word "Start" in the lower left corner of your monitor. This will bring up a menu that lists many of the general functions of your computer. Left click on the "Programs" icon and you will see a list of all the different programs your computer is programmed to perform. One of these programs is your "word processor", or "Microsoft Word". Left-click your mouse on this icon and this will open your word processor (this should be a blank screen with tool bars across the top). You will notice that the cursor (a vertical bar) is flashing in the upper left corner of the blank screen.

Right-click your mouse once and the "copy and paste" menu will appear again. Click the left mouse button once on the option "paste" and the entire contents of the clipboard will be copied onto your word processor where you can edit (add or delete) whatever you want.

Congratulations, you have just mastered the "copy and paste" process. By the way, when you pressed the word "paste", you did not erase the contents of the clipboard, they are still there. You can "paste" the contents of the clipboard to as many places as you wish. The contents of the clipboard will not be erased until you replace (copy) them with another word (or sentence) (or paragraph) (or page) you want copied (or until you shut your computer off).

Save. To save the word (or sentence) (or paragraph) (or page) left-click on the word "File" in the upper left corner of your monitor, then left-click again on the words "Save As". This will bring up the "Save As" menu. At the top of the "Save As" menu there is a window titled "Save in" with a down arrow at the end of it. Press the down arrow and select from the list where you want to save the information you have just "pasted " into your word processor. If you want to save it in the new folder you just created in step 4 (PPA) simply left-click on "PPA". PPA will then appear in the "Save in" window.

Near the bottom of the "Save As" screen, in the window titled "File name", type the name you want for the file you just "copied and pasted" from the Internet or your email (such as "Advertisements", "Auto 1" or "Auto 2"). Just below the "File name" window is another window titled "Save as type" with a down arrow at the end of it. Press the down arrow and select the option "word document", then left-click on the "Save" button at the right side of the "Save in" screen.

Congratulations again, you have just created a file with a "name of your choice" and saved it to your "PPA" folder, which is stored in your computer in an area called "My Documents" or "Documents".

Go to your "Desk Top" and left click on the icon called "Word", or "Word Processor", or "Microsoft Word".

Ø If one of these titles do not appear on your "Desk Top", simply left click on the word "Start" in the lower left corner of your monitor. This will bring up a menu that lists many of the general functions of your computer. Left click on the "Programs" icon and you will see a list of all the different programs your computer is programmed to perform. One of these programs is your "Word Processor", or "Microsoft Word". Left-click your mouse on this icon and this will open your word processor (this should be a blank screen with tool bars across the top). You will notice that the cursor (a vertical bar) is flashing in the upper left corner of the screen.

In the upper left corner of this screen left-click on the word "File" and then left-click again on the word "Open". This will bring you to the "Open" screen. In the upper left portion of the "Open" screen there is another window called "Look in" with a down arrow at the right end of it. Left-click on the down arrow and you will see the main locations that are available on your computer. Double left-click on the "C" option, then double left-click on the "My Documents" option and then double left-click on the "PPA" option.

You are now in the "PPA" file you opened earlier. Left-click once on the file titled "Advertisements" and this file will be displayed on your "Word Processor" screen and you can make whatever changes are necessary, such as hyperlinks.

To set up a hyperlink, highlight the portion of your message that you want to become a hyperlink. Then left-click on the "tools" menu at the top of your screen and left click again on the "customize" option. This will take you to the "toolbars" screen where you need to place a check mark (left click) next to the "standard" option and then left click exit. You should now have a new toolbar somewhere on your main screen.

With the mouse, slide the cursor along the new toolbar to the icon titled "Insert Hyperlink"; then click the "left" mouse one time on that icon. This will bring up the "Insert Hyperlink" screen.

Ø You can also create a hyperlink by left-clicking once on the word "Insert" at the top of the screen and then left-click on the option titled "Hyperlink" that will appear. This will also bring you to the "Insert Hyperlink" screen.

You are now at the "Insert Hyperlink" screen. In the window near the top left of the screen (titled "Link to file or URL"), type: mailto:ppa1@freeautobot.com (use your freeautobot address as it has to be the same as the address in your autoresponder that you opened. Then click "ok" at the bottom of that screen.

Congratulations, you have just created a "Hyperlink". The sentence you highlighted that says "Click here (mailto:ppa1@freeautobot.com) and press send to receive free information on how to have your retirement under your control in the next 30 days." should now be colored. If anyone clicks anywhere on this colored sentence (left mouse button), they will be sent (Hyper-linked) to their own email "compose" box. Go ahead and try it (then exit your "compose" box and again minimize your Internet connection) (in the upper right hand corner of your monitor)

Ø If you are going to edit an existing hyperlink, first highlight the existing hyperlink (once you have "highlighted" it, be sure that you do not touch the "space" bar on your keyboard as this will erase everything you have highlighted), and then click on the "Insert Hyperlink" above. This will take you to the "Insert Hyperlink" screen where you will notice that the hyperlink you want to change is already typed in the window near the top left of the screen titled "Link to file or URL". Edit the address in this small address window to show your correct address (either your autoresponder address or a website address). Then click "ok" at the bottom of that screen.

Send one of the following ads to all your "friends, neighbors and relatives" or to whichever ezine you choose. If you re-send the same ad to the same group of prospects (the same ezine), we recommend you rotate the subject lines each time you run the ad.

Copy and paste the following three ads offline in your "word processor" in a new folder called "PPA". Save these advertisements in a file titled "Advertisements" and store them in your "PPA" folder.

Ø If you don't know how to "create a new folder and file" or how to use the "copy and paste" features of your word processor, click here and we'll show you how .

There are three different advertisements between the below asterisk lines (be sure to use your autoresponder address, not the xxx's).

Advertisement # 1 is usually used when mailing to "friends, relatives, or neighbors", or when running a "Solo" ezine ad. This ad contains 106 words, has about 96 characters per line and 10 lines. It can be narrowed to 60 - 65 characters per line, but then you have about 14 lines. Adjust it as needed to meet ezine requirements.

Use one of the following subject lines with your advertisement, or write one of your own:

FREE: RETIREMENT INCOME POSSIBLE IN ONE MONTH. NOT A GET RICH QUICK PROGRAM OR A CHAIN LETTER!

You will easily learn, step-by-step, how to retire with at least $5,000 a month for the rest of your life. Discover the simple "Secrets" of how you can live a life full of pleasure, money, and free time! There is no charge for this information. It is absolutely FREE (valued @ $199.95) for you!

What are you waiting for? ACT NOW! Become financially independent. Capitalize on the Internet from your own computer. Use our proven system for retirement and success!

Click here (mailto:xxx1@freeautobot.com) and press send to receive free information on how to have your retirement under your control in the next 30 days.

Advertisement # 2 is usually used when running a "Top", "Middle" or "Bottom" ezine ad. This ad contains 63 words, has about 96 characters per line and 8 lines. It can be narrowed to 60 - 65 characters per line, but then you have about 11 lines. Adjust it as needed to meet ezine requirements.

Use one of the following subject lines with your advertisement, or write one of your own:

FREE: RETIREMENT INCOME POSSIBLE IN ONE MONTH. NOT A GET RICH QUICK PROGRAM OR A CHAIN LETTER!

Learn to retire with at least $5,000 a month. Discover "Secrets" of how you can live a life full of pleasure, money, and free time! No charge for this information. Act today and it is absolutely FREE!

What are you waiting for? ACT NOW! Become financially independent. Capitalize on the Internet from your own computer. Use our proven system for retirement and success!

Click here (mailto:xxx1@freeautobot.com) and press send for FREE information.

Advertisement # 3 is also used when running a "Top", "Middle" or "Bottom" ezine ad, free ezine ad or a classified ad. This ad contains 40 words, has about 96 characters per line and 3 lines. It can be narrowed to fewer characters per line, but then you'll have more lines. Adjust it as needed to meet ezine requirements.

Use one of the following subject lines with your advertisement, or write one of your own:

FREE: RETIREMENT INCOME POSSIBLE IN ONE MONTH. NOT A GET RICH QUICK PROGRAM OR A CHAIN LETTER!

Discover "Secrets" of how to Retire with at least $5,000 a month from your computer. Act today and there will be no charge for this information! What are you waiting for?

Click here (mailto:xxx1@freeautobot.com) and press send for FREE information.

One of the above ads is probably the same one you responded to (except the autoresponder address in the last line of the ad is different). These ads work, use them. Make a copy of the ads and everything between the asterisk lines and save all of it in your "word processor" PPA folder in a file titled "Advertisements". Be sure to convert the colored lines into hyperlinks that lead to your autoresponder titled xxx1@freeautobot.com (click here and we will show you how easy it is).

For complete success on the Internet, you need to learn to use "autoresponders".

You might be asking yourself, "what is an autoresponder"? When someone sends you and email asking for information, they have to wait for you to take the time to read their letter and send a response to them. It could take several hours, several days or even several weeks for the information originally requested to get back to the person who requested it. By then the one who requested the information might have forgotten why they wanted it or they may have lost interest all together.

Or, you could set up an autoresponder and the information originally requested would be sent back to the person who requested it within seconds or minutes, all automatically, even while you're sleeping, or playing golf or whatever.

An autoresponder is an Internet tool that automatically sends your pre-written message or information back to the person who requests it instantly rather than hours, days or weeks. Without an autoresponder, your Internet business will crawl at a snails pace and will require your constant attention and probably will not be successful.

There are many companies on the Internet who charge a fee to use their autoresponders. Some of them will let you use it free, but most of the free ones include a short "banner" advertisement for some other product when they send your message back to the person who requested it.

Fortunately, there are some autoresponders that are free and do not add another advertisement with your message. We will be using those free autoresponders throughout this MLM series.

The steps that we walk you through to set up your autoresponders are very simple and can be

followed by a computer beginner. At the completion of this step-by-step process you will have

set up two autoresponders that will be part of your MLM series. We will also show you how to

If you don't have to recruit, sell or close, you're probably wondering, "how am I supposed to reach and sponsor new representatives into my MLM company?" The answer is simple, advertise and promote this MLM series. Let your computer do the recruiting, selling and closing for you.

There are many places where you can advertise any product or service, such as newspapers, magazines, radio, television, billboards and road signs, and, of course, the Internet.

With the advent of the Internet, the advertising world was turned upside-down. For the first time, the ordinary individual could advertise and reach millions of people all around the world with no more cost than advertising locally and many times free.

You can pay an advertising agency to do your Internet advertising for you, or you can learn to do it yourself for little or even nothing. The information in the next few paragraphs will teach you (absolutely free) how to advertise on the Internet and get the same results the "professional" agencies get. Remember that the reason for all of this advertising is to build a solid sales organization with your MLM Company. The "recruiting, selling and closing have been totally eliminated. All you have to do is ADVERTISE.

How do you advertise on the Internet? Most Internet "Guru's" will try to convince you that you have to have a "website" (an Internet store). After you get one, you need to attract someone to your site so they can sign up with you or at least buy some of your products. This requires constant advertising.

Ø You can try to achieve a "high placement" in search engines for your website, and this will work, but you have to work constantly to maintain your placement position.

Ø You can learn how to use "Banner" advertising to attract visitors to your website, and this too will work, but again, you have to work very hard to keep traffic coming to your website.

There is a much simpler method that is much less expensive and gets much better results.

Your first contact with us was through an email we sent you. At the end of that email you were given instructions how to get more information about our program. Those instructions sent you to your own email box where you found an email already addressed. All you had to do was press "send" and a "blank" email was sent to an autoresponder address that sent you, in return, an email that contained the information you requested. After you read the information in the email the autoresponder sent you, you were directed to this website you're reading right now via a "hyperlink".

You are the "Proof" that this MLM email series works. The person who sent you the original email in this MLM series completed the instructions you are reading. Now you are following the same step-by-step procedure, and you too will soon be sending emails to someone else.

Remember that you're not trying to create hundreds of product sales on the Internet, you're only looking for a few new representatives (usually about 20) who, like yourself, will purchase products for themselves or for resale, and invite (sponsor) others who will do the same thing. Because of the millions of prospects available on the Internet, your sales organization will grow very rapidly. Every time someone in your organization buys a product for whatever use, a sale is made and you will receive a commission from representatives several levels below you.

Your job is to ADVERTISE. Let your computer, ezines and emails, the autoresponders, the hyperlinks, the and this website do the selling for you.

Email and Ezines

Sending email over the Internet is a simple, efficient, discrete way to promote any opportunity. It gives the prospect a chance to fully understand the opportunity, and then make the choice of if and when to participate.

Be sure when sending emails that you are not sending SPAM. Spam is defined as unsolicited email. In other words, the recipient has not given their permission for you to send any email to them. Unlike the U.S. Postal System, the Internet requires you have permission from someone before sending them email. Fortunately, friends, business associates and relatives usually don't consider any messages you send them to be spam and will open and read whatever you send.

Once again, you must be sure you are not sending unsolicited email (SPAM). Even though you might think everyone would be eager to hear about your program, they may not think so.

If you are going to email to addresses you do not know personally, I recommend that you use one of the following:

Ø An "Opt-In" mail list (not quite as expensive, but more risky because many of their "opt-in" addresses really didn't "opt in" and may accuse you of spamming.) "Opt-in" means the recipient has given their permission to have email sent to them.

You can purchase your own "harvesting" software and gather thousands, even millions of email addresses, absolutely free. The expense of these software programs can be as little as a few hundred dollars to as high as several thousand dollars. But when you send email to them, you are spamming.

Ø Ezine (a short term for electronic magazine) is usually the least expensive emailing campaign. Another major benefit of ezine mailing is that you avoid spam problems because the ezine managers or publishers are the ones who actually send the emails, not you.

The best people to email to other than your friends, relatives and business associates, are the smaller, well-maintained ezines. The people on these "content-oriented" ezine lists actually read their emails and the response rate is very high.

When someone reads an ezine, it's just like reading a magazine you received through a subscription in the mail. The difference with an ezine is that it is received via the Internet, directly into your email box, and is usually a lot shorter than a regular magazine.

Like a magazine, the contents of an ezine are usually directed toward a particular group of readers; for example, an automobile ezine for automobile enthusiasts, or a horse ezine for horse lovers, or a science ezine for scientists, . . etc. You should consider choosing an ezine category like "home businesses" or MLM . . . etc. to advertise in. The recipients of each ezine have chosen to receive the ezine via a subscription (usually free) similar to the recipients of a magazine who have chosen to subscribe to that magazine (at a price).

Also like a magazine, an ezine contains advertisements. This is where you get involved with ezines. The publisher of each ezine makes a profit when you advertise with them. Even though the publishers of these ezines want your advertising business, they do reserve the right to limit the material that is advertised in their ezine. For example, a publisher may not want pornographic advertisements to be sent out to their readers, or they may not want "get-rich-quick" schemes sent out and some of them don't want any MLM advertisements . . . etc. Most publishers are very protective of their subscribers and will not let their lists be over-advertised.

A traditional magazine is read from front to back. Ezines are read from top to bottom, the way it is received on the Internet. When advertising with ezines, you can place your ad in several different positions within the ezine. For example, you could place your ad at or near the "top" of the ezine, in the "middle" of the ezine or at the "bottom" of the ezine. The higher position your ad is placed, the more likely it is to be read. Unfortunately, a higher position ad costs more than a lower position ad because the higher position ads are more likely to be read first.

The "top", "middle" and "bottom" position ads are usually limited to between 50, 60 or even 75 characters per line. Spaces between words and punctuation marks are counted as characters with a maximum of 3 - 10, sometimes as many as 15 lines per ad (lines skipped for spacing between paragraphs count as a line). There may be several ads in each issue of the ezine.

There is another ezine advertisement called a "solo" ad. When you purchase a "solo" ad, you are the only advertiser in that issue of the ezine. This is obviously the most productive ad (and the most expensive). We recommend the use of this "solo" ad as your main emphasis in Internet advertising, but the "top", "middle" and "bottom" ads also work well. Usually, the size limitations of the "solo" ads are much more liberal, but are typically no longer than one page. Those who read the "solo" ezine ads are highly motivated and very responsive.

When you are just beginning with ezine ads, don't be afraid to call or send an email to the publisher. Talk to them. They want your business and are very eager to help you. You can email a copy of your ad to the publisher and ask if they approve of it's content, when the next available "solo" ad position is open and what the cost will be. Remember that many of the smaller ezine publishers have other "day-time" jobs and cannot respond to you immediately but they will respond. Each ezine is usually written, published and mailed to their readers by one person. Most ezines are a one-man/woman business.

Serious marketers will purchase a subscription to the "Directory of Ezines" ($39.95/year). Click here to go to the "Directory of Ezines" link . Most of the ezines listed in this directory accept "solo" ads, (not all ezines will) and many accept free ads. Take the time to learn how to use the Ezine Directory, it is well written and easy to understand. If you don't want to spend the $39.95, you can go to "ezines" on the "www" and find ezines one at a time.

Send ezine emails consistently (e.g. weekly) regardless of the results. Some ezines are more responsive than others, and some require more “repetition” than others. If you email consistently, however, you should generate an average response that should prove to be very successful. Usually, the highest response to a single mailing is the third or forth time your ad has been mailed to the same group of people. There should not be any conflicts with others using the same list since these lists change weekly and are still responsive after many uses.

As we said earlier in this MLM series, most MLM companies only require you to recruit (sponsor) a few representatives (distributors) to be eligible to receive their maximum commissions or bonus. Therefore, you won't have to spend the rest of your life advertising! When you have the necessary number of distributors you're seeking, you can cut back on your advertising or perhaps even quit. You can always place another ad at any time.

Let the Internet do all your work for you. Your job is to advertise, not sell. The more people you send the ad to, the more distributors you will have. If you send this MLM email series to 10,000 prospective recipients and only 1% respond and "sign-up", that's 100 new distributors. If only 1/10th of 1% "sign-up", that's still 10 new distributors. If only 1/100th of 1% "sign-up", that's one (1) new distributor. What would happen if you sent emails to 100,000 prospects? How about 10,000 or 100,000 each week? Remember that you're only looking for about 20 distributors.

Obviously, it won't be long until you have all the distributors you need. Remember that each distributor who signs up via this MLM email series will also be signing up other distributors with this same MLM email series in addition to their "friends, relatives and neighbors". You will rise to the upper levels of your company very quickly. You may only have to advertise one time or only for a few weeks.

Send the email ad to everyone you know. There are literally millions of opportunity seekers around the world who can be contacted and this will provide you with virtually unlimited potential. After all, who isn’t interested in financial freedom and good nutritional health?

Don’t be afraid to send it to those with whom you’ve had a bad business experience. You will actually be doing them a favor by introducing them to this program and both of you can easily make up for any financial losses you may have had in the past. You may know enough "friends, relatives and neighbors" that you won't have to advertise on the Internet, just send them the first "Advertisement" email you received from us and let this website and your computer do the rest for you.

Click anywhere on this sentence and you will be taken to your own email compose/write box. You will find an email letter that has already been addressed to ppa3@freeautobot.com. It is not necessary to type anything in the subject line or the message box, just press the "send" button. The autrosponder "ppa3" will immediately send a new email message back to your email box titled "Visit our company!"

Exit this PPANOW website now. Go to your email box and an email titled "Visit our company" will be in your email box. Read it and follow the instructions. We will then bring you back to this website.

Once again, we would prefer that you set up your own MLM email series, but if you want us to do it for you, we will need the following information from you:

With the above information, we will open a new free email box for you (probably at Yahoo.com) and two (2) free autoresponders at "Freeautobot.com". If you have an email box that you would like us to use, we will need the address and password.

We will then prepare the email messages (with the necessary hyperlinks that reflect your new email address and autoresponder addresses) and install them into your autoresponders and advertisements. We will be sure your company ID # is also installed correctly and the proper hyperlinks are included.

We will then run a complete test to be sure all of the hyperlinks are working. Upon completion of the testing, we will send your new email address (and password) and both autoresponder addresses (with their passwords) to you at the email address you are sending this information from.

We recommend that you go to your new email address and each of the autoresponders and change the passwords (for simplicity, make all the passwords the same).

The $49.95 (U.S.) can be sent to us by "paypal" at sea1964@hotmail.com or by "egold" (account # 356557). If you wish to pay with cash or money order, send it to:

As the fee of $49.95 does not include advertising expenses, we will leave all advertising costs (including the cost of advertising in various ezines) and the cost of your membership in the Directory of Ezines (see the explanation shown above) entirely in your hands.

Once we have the information and the $49.95, we will set up and complete your MLM email series in about 48 hours. You can contact us via the internet at: mailto:sea1964@hotmail.com" for any questions you may have.

We have gone into great detail with the procedures in this "Help" website so that even a novice to a computer and the Internet can complete this MLM series and become very successful.

(All of the instructions is this "help" section were written using "Windows 98".)

Click on any of the following links to go to the section of your choice. When you have finished the section you chose to read, left-click the "back" arrow (one click at a time) until you have returned to where you started.

When you want to save something you have seen on the Internet or in an email you have received (something you may want to edit or use in the future), an easy way is to use the "copy and paste" feature of your computer. This is done by first highlighting the word (or sentence) (or paragraph) (or page) you wish to save.

Highlighting is accomplished by first moving the cursor (use your mouse) to the beginning of the word (or sentence) (or paragraph) (or page) you wish to highlight and then press (and hold down - do not release it yet) the left mouse button. With the left mouse button still held down, slide (drag) the cursor (with your mouse) to the end of the word (or sentence) (or paragraph) (or page) you wish to save and then release it. You will see that the word (or sentence) (or paragraph) (or page) you wish to save is now a different color (it has been highlighted). If you highlighted too much or not enough of the word (or sentence) (or paragraph) (or page) simply click the left mouse one more time. This will remove the highlighted area and you can try it again.

Copy. When you have highlighted the entire word (or sentence) (or paragraph) (or page) you wish to save and have released the left mouse button, move the cursor with the mouse to anywhere in the highlighted area (it will now be a white arrow) and click the right mouse button once. This will bring up the "copy and "paste" menu (and possibly a few other options). Left click your mouse once on the "copy" option and this will place a copy of the entire page in a temporary file called your "clipboard". Whatever you place on the clipboard is accessible either "on-line" or "off-line".

Press the "minimize" box in the upper right corner of your monitor and go "off-line" or "out of your email-box". Go to your "Desk Top" and left-click on the icon titled "My Documents" or "Documents". Your "Desk Top" is the main screen that appears when your computer is first turned on. An "Icon" is a tiny picture with the name of the program it represents typed below it.

Ø If one of these titles do not appear on your "Desk Top", simply left-click on the word "Start" in the lower left corner of your monitor. This will bring up a menu that lists many of the general functions of your computer and one of these "Document" titles will be on that list. Left-click on "My Documents" or "Documents" and you will be taken to a screen that shows all of the various folders you have there.

Create a new folder. When you are at the "My Documents" screen, left-click on the word "File" in the upper left corner of your monitor and then left-click again on the word "New". This will take you to another screen with several options. Click on the option titled "Folder" and you will find yourself back at the "My Documents" screen. You will notice that there will now be an addition of a new yellow colored folder with the words "New Folder" highlighted in it. Also notice that the cursor is flashing at the end of the words "New Folder". Use your "backspace" key on your keyboard and backspace and remove the letters "New Folder". Now type the letters "PPA" in the space where "New Folder" was.

Congratulations, you have just set up a folder titled "PPA". At this time it is empty, but this is where you will store the "email files" we talk about throughout this MLM series.

Paste. Go to your "Desk Top" and left click on the icon called "Word", or "Word Processor", or "Microsoft Word".

Ø If one of these titles does not appear on your "Desk Top", simply left click on the word "Start" in the lower left corner of your monitor. This will bring up a menu that lists many of the general functions of your computer. Left click on the "Programs" icon and you will see a list of all the different programs your computer is programmed to perform. One of these programs is your "word processor", or "Microsoft Word". Left-click your mouse on this icon and this will open your word processor (this should be a blank screen with the words "File", "Edit", "View", "Insert", "Format", "Tools", "Table", "Window" and "Help" across the top). You will notice that the cursor (a vertical bar) is flashing in the upper left corner of the blank screen.

Congratulations again, you have just mastered the "copy and paste" process. By the way, when you pressed the word "paste", you did not erase the contents of the clipboard, they are still there. You can "paste" the contents of the clipboard to as many places as you wish. The contents of the clipboard will not be erased until you replace (copy) them with another word (or sentence) (or paragraph) (or page) you want copied (or until you shut your computer off).

Save. To save the word (or sentence) (or paragraph) (or page) that you just copied to your word processor screen, simply left-click on the word "File" in the upper left corner of your monitor, then left-click again on the words "Save As". This will bring up the "Save As" menu. At the top of the "Save As" menu there is a window titled "Save in" with a down arrow at the end of it. Press the down arrow and select from the list where you want to save the information you have just "pasted " into your word processor. If you want to save it in the new PPA folder you just created, left-click once on "PPA". PPA will then appear in the "Save in" window.

Near the bottom of the "Save As" screen, in the window titled "File name", press the down arrow and select a topic, or type the name you want for the file you just "copied and pasted" from the Internet or your email (such as "email #1", "email # 2", "email # 3", "email # 4" "email # 5") or. Just below the "File name" window is another window titled "Save as type" with a down arrow at the end of it. Press the down arrow and select the option "word document". Left-click on it and then left-click on the "Save" button at the right side of the "Save in" screen.

Congratulations again, you have just created a file with a "name of your choice" (example: "email # 1") and saved it to your "PPA" folder, which is stored in your computer in an area called "My Documents" or "Documents".

Go to your "Desk Top" and left click on the icon called "Word", or "Word Processor", or "Microsoft Word".

Ø If one of these titles does not appear on your "Desk Top", simply left click on the word "Start" in the lower left corner of your monitor. This will bring up a menu that lists many of the general functions of your computer. Left click on the "Programs" icon and you will see a list of all the different programs your computer is programmed to perform. One of these programs is your "Word Processor", or "Microsoft Word". Left-click your mouse on this icon and this will open your word processor (this should be a blank screen with the words "File", "Edit", "View", "Insert", "Format", "Tools", "Table", "Window" and "Help" across the top). You will notice that the cursor (a vertical bar) is flashing in the upper left corner of the screen.

You are now in the "PPA" folder you opened earlier. Open the folder and left-click once on the file titled "Advertisements" (or any of the "email" files in the folder). The file will be displayed on your "Word Processor" screen where you can make whatever changes are necessary, such as hyperlinks.

To set up a hyperlink or edit an existing hyperlink, first open a "file" into your word processor screen. Highlight the portion of your message that you want to become a hyperlink. (If you don't remember how to highlight, click here). Then, left-click on the "tools" menu at the top of your screen and left click again on the "customize" option. This will take you to the "toolbars" screen where you need to place a check mark (left click) next to the "standard" option and then left click exit. You should now have a new toolbar somewhere on your main screen (usually across the top).

With the mouse, slowly slide the cursor along the new toolbar until the icon titled "Insert Hyperlink" is shown; then click the "left" mouse one time on that icon. This will bring up the "Insert Hyperlink" screen.

You are now at the "Insert Hyperlink" screen. In the window near the top left of the screen (titled "Link to file or URL"), type: mailto:xxx1@freeautobot.com (use your freeautobot address as it has to be the same as the address in your autoresponder that you opened. Then click "ok" at the bottom of that screen.

Congratulations, you have just created a "Hyperlink". The word or sentence you highlighted that says "Click here (mailto:xxx1@freeautobot.com) and press send to receive free information on how to have your retirement under your control in the next 30 days." should now be colored. If anyone clicks anywhere on this colored word or sentence (left mouse button), they will be sent (linked) (Hyper-linked) to their own email "out" box or "compose" box. Go ahead and try it (then exit your "compose" box and again minimize your Internet connection) (in the upper right hand corner of your monitor).

Ø If you are going to edit an existing hyperlink, first highlight the existing hyperlink (once you have "highlighted" it, be sure that you do not touch the "space" bar on your keyboard as this will erase everything you have highlighted), and then click on the "Insert Hyperlink" words in the menu across the top of the screen. This will take you to the "Insert Hyperlink" screen where you will notice that the hyperlink you want to change is already typed in the window near the top left of the screen titled "Link to file or URL". Edit the address in this small address window to show your correct address (either your autoresponder address or a website address). Then click "ok" at the bottom of that screen.

When you have edited the "Advertisements" file and saved the changes you made, open and edit each of the other emails titled "email # 1", "email # 2", "email # 3", "email # 4" and "email # 5".

Ø The hyperlink address in the email titled "Advertisements" has to be changed to that of your xxx1autoresponder.

Ø The hyperlink address in "email # 1" has to be changed to that of your xxx2autoresponder.

Ø The hyperlink address in "email # 2" has to be changed to that of your xxx3autoresponder.

Ø The hyperlink address in "email # 3" has to be changed to that of your xxx4autoresponder.

Ø The hyperlink address in "email # 4" has to be changed to that of your xxx5autoresponder.

There are three hyperlinks in "email # 4. The only hyperlink address that has to be changed is your company ID # you receive after you joined our company. Your company ID # is the series of numbers after the forward slash at the end of the company web address (example: www.(your company name).com/ xxxxxx) (be sure to use your company ID # xxxxxxx, not the Id # of the person who sent you to this MLM email series).

To save the changes you have made to each email, left-click once on the "X" in the upper right hand corner of your screen. Your computer will ask if you want to save the changes you've made to that document. Left-click once on "yes".

For complete success on the Internet, you need to learn to use "autoresponders".

You might be asking yourself, "what is an autoresponder"? When someone sends you and email asking for information, they have to wait for you to take the time to read their letter and send a response to them. It could take several hours, several days or even several weeks for the information originally requested to get back to the person who requested it. By then, the one who requested the information might have forgotten why they wanted it or they may have lost interest all together.

Fortunately, there are some autoresponders that are free and do not add another advertisement with your message. We will be using the free autoresponder called "freeautobot.com" throughout this MLM series.

The steps that we walk you through to set up your autoresponders are very simple and can be

followed by a computer beginner. At the completion of this step-by-step process you will have

set up five autoresponders that will be part of your MLM series. We will also show you how to

Go to http://www.freeautobot.com website on the Internet and click the icon on the left side titled "Join Now - Free".

Complete the "Sign up" instructions. For simplicity, try to select the same user name (that's the portion of your address on the left side of the "@" sign) and password (if they are available) that you used in setting up one of your email addresses. In the autoresponder add the number "1" after the user name. (Here's an example: if your email address is xxx@hotmail.com, try to make your autoresponder address xxx1@freeautobot.com.)

If the user name you select in the autoresponder (example: xxx) is not available, that's ok, use whatever addresses you want (it's just easier to remember if the names are similar). Whatever user name you use, be sure to ad the number "1" after it (we'll explain why later). Again for simplicity, use the same password for all of your autoresponders that you used with your new email address. Once you have acquired a user name for the first autoresponder, it is very easy to ad an additional character to it for the other autoresponders.

Congratulations, you have just set up 5 different autoresponders. Each autoresponder should have a different number following your user name. You should have 5 separate autoresponders titled as follows:

xxx1@freeautobot.com, xxx2@freeautobot.com, xxx3@freeautobot.com, xxx4@freeautobot.com and xxx5@freeautobot.com (use your own user name in place of the "xxx's").

Be sure to record your new autoresponder addresses and passwords somewhere they are safe and you can access them easily.

When you have opened all of your autoresponders and the email hyperlinks have been edited, it's time to "copy and paste" the emails to each of the autoresponders.

Go into your PPA word processor folder and open the file titled "email #1". Be sure the hyperlink is correct and then "Copy" it to your clipboard. .

Go to the Internet website "www.freeautobot.com" and login to your xxx1@freeautobot.com autoresponder. (When you go from an "offline" site to an "online" site, you will not loose anything on your clipboard.)

At the next screen, left click on "message control" near the top. At the "message control" screen left click on the word "Edit" in the white area (not the blue "Edit"). This will take you to the "Edit Message" screen. (Note that the small box "add new message after message" just below the word "Edit" should be "0". This indicates that your message will be sent out immediately upon arrival and you don't need to make any changes here).

At the "Edit Message" screen, delete the phrase "Instant auto response" in the white message box. Replace it with a copy of "email # 1" (this is on your clipboard).

Ø This is easily accomplished by placing the cursor in the upper left-hand corner of the message box and right-click the mouse once. This will bring up the "copy and paste" menu again. Left-click the mouse once on the "paste" option and the entire "email # 1" message will appear in the message box.

The hyperlinks that were highlighted in your "email file" will not appear highlighted in the autoresponder text box. They are there and will appear in the message when it is sent out. Therefore, make sure the hyperlink is correct before you copy and paste to your autoresponder.

When you have completed the "subject line" and the "message box", left click on the "update" icon at the bottom of the page. Autoresponder # 1 is now ready. Left click on the words "Log out" at the top of the "Edit Message" screen. This will take you back to the "Login" screen.

Go back into your PPA word processor folder and open the file titled "email # 2". Copy it onto your clipboard. Return to "www.freeautobot.com" and login to "xxx2@freeautobot.com. Follow the same procedure you just did for "email # 1" except use the file titled "email # 2" instead of "email # 1". Repeat this same procedure for each of the other email files titled "email # 3", "email # 4" and "email # 5".

The subject line for the other autoresponders is "email # 2", or "email # 3", or "email # 4", or "email # 5".